Portable Dance Floor Black & Red Checkered 2.78 x 5.09m Modular Kit
2.78m x 5.09m Black & Red Indoor / Outdoor Portable Dance Floor
This striking black and red indoor / outdoor portable dance floor is an ideal package system for dance floors for many types of Events, like Concerts, Exhibitions, Weddings, Motor shows, Social Functions or even School Balls. These dance floors are waterproof, easy to clean and are robust, they can be used over a variety of surfaces, such as thin carpet, wood, vinyl, concrete and very firm grass areas. If you have a surface that has more than approximately 4mm of give, then you would need to build a hard floor underneath, Scattermats will not guarantee the dance floor for non-firm surfaces. Each tile has sprinkles of sparkles with a multitude of colours, adding character to the base colour.
Please allow for slight colour variations due to different computer and monitor settings, not stocked in Perths Rug Store.
Value For Money Rating out of 5: ★★★★★
2.78m x 5.09m Black & Red Checkered Easy Assemble Portable Dance Floor
Our portable checkered Black and Red Dance Floors are easy to clean and maintain, easy to assemble, anti-slip, self draining, lightweight and durable with an ABS resin semi-gloss finish surface. Utilising a simple interlocking panel system there is no experience, training or tools required for installation. Simply drop and click the dance squares into place and clip in the aluminium edges and the simple snap clip system will ensure the floor is secure and holds in place.
Each tile measures 462mm (D) x 462mm (W) x 20mm (H), Aluminium edges are 110mm wide.
Portable Dance Floor Intallation Instructions
Step 1: Turn the tile squares upside down and remove all the locking clips that are locacted in the base bottoms, there should be 7, now install them into the clip recepter holes in the sides of the tiles with the hook part of the clip facing upwards , 3 on 1 side and 2 for the other 2 sides, 1 side has none. For removing clips, simply squeeze the leg clips together and pull out.
Step 2: Lay the tile squares loosely on the floor face up, start with the 3 clips facing you with blank side facing away, now grab the next tile with the 3 clips facing you and push into the first tile, then another and so on. Continue to the desired length, then turn and start the same procedure in the opposite direction as the first row, but now you will need to clip the 2 clip side into the first row as you go.
For removal, just do the reverse of steps 1 and 2.
Step 3: Clip in all the aluminium border edges into place.
|Specific Type||Specific Value|
|Cleaning / Washability||Hoseable in Cold Water|
|Additional Features||Colourfast, Anti-Static, Moth Proof, Anti- bacterial, Low-Flammable, Water Repellant & Soil Repellent|
|Vacume Rating||Extremely Easy|
|Also Available In Other||Colours & Sizes|